Voted Best Murphy Fence Repair Company!!

We’re well known as Murphy’s Best Fence Repair company! We save you money by doing fence repairs and upgrades to restore your fence to that brand new look. Customers are surprised how we transform an old fence to look new through our process of cleaning, staining, and replacing old pickets!!

Looking to Install a new fence?

Of course, when needed, we can also replace your old fence with a brand new one. When your old fence has seen its final days; it may be time to have our estimator come out (for free) to your home for an honest assessment if your fence needs to be repaired, cleaned, stained or if it’s time for a new fence.  It is always better to have the fence looked at before spending more than you need.

At Fence Makeovers our team knows what to look for to help Prevent wear and tear on the fence.  Save time and money on a fence repair by checking it out before the small problem turns into a large one. It costs several thousand dollars for a new fence and most times it’s under $1000 to repair your fence.

Request a Free Estimate

Call us today to hear about our current offers!

Fence makeovers 972-769-2555

A fence is built to last, it simply requires regular maintenance. Therefore, neglecting the first signs of problems will add stress to the entire fence structure and can cost you more in the long run.

Murphy Fence Repair Experts Suggest Looking for these Signs for Repair:

  • Leaning post or fence
  • Broken post at or below ground level
  • Panels that have become detached from the post.
  • Corrosion on the post, pickets, or rails.
  • Fence Gates not closing or hinge issues

Upgrading your fence with Murphy’s Fence Repair experts:

  • A cap can be added to the top of the fence 
  • Kickboards from time to time need to be replaced or added
  • Adding Trim will give the appearance of a new fence
  • Replace Wood Post With Metal
  • Convert a Side by Side Fence to a Board on Board Fence

Fence repair can be done Before the small problem turns into a costly replacement!

Call us at 972-769-2555 today to schedule an on time appointment or click on the link and submit your request.

Before you Begin

Before you choose a fence style and height, we recommend reading the City of Murphy, TX Fence Ordinances to see if there are any restrictions for style or height for your fence. We have provided this information for you below. If you have any questions, you can ask your Fence Makeover representative, as they have extensive experience dealing with the City of Murphy permitting department!

Also don’t forget to check with our HOA – Home Owners Association as they have guidelines that will need to be followed. A rendering or picture of the repair or replacement of the fence will be required with most HOA’s. Give yourself plenty of time to get the updated fence plenty of time for approval from the board. Helps make the process go more smoothly.

We make it easy!

We secure and complete all the required city permits and follow city ordinances so you don’t have to worry about anything. We’ve added their regulations below taken from the Murphy website.

City of Murphy Fence Permits & Regulations

1. Complete and submit a permit application.
2. Submit two (2) site plans (a survey plat is required) showing the proposed location of
the fence with respect to the property lines, swimming pools on the property and
adjacent properties, easements and house.
3. Fences that are swimming pool barriers must comply with 2015 IRC, AQ 105 Barrier
4. Permit fee- See Murphy Code of Ordinances, Article A9.000 Building, Construction and
Development Related Fees

*See attached Fence Code and Barrier Requirements

Sec. 26.03.003 Fences in residential areas
(a) Definitions. The following words, terms and phrases, when used in this section, shall have
the meanings ascribed to them in this subsection, except where the context clearly indicates
a different meaning:
Build. Construct, erect or place, or cause, suffer or allow another to construct, erect or place.
Fence. Any structure which exceeds 18 inches in height above the nearest grade and which
encloses, partitions or divides any yard as defined in chapter 30.
Residentially zoned. Property zoned single-family, patio home, or single-family attached, or any
property zoned as a planned development district (hereafter PD district) where the base
zoning within the PD district is one of the foregoing.
Zoning ordinance. The city zoning ordinance, as set out in chapter 30, as amended.
(b) Height limit. No fence shall be built so as to exceed eight feet in height on any residentially
zoned property nor shall a fence be built so as to exceed ten feet on any nonresidential
(c) Measurement of fence height. Fence height shall be measured from the grade adjacent to
the fence from the applicant’s side of the fence. If the fence is constructed on top of a
retaining wall it shall be measured from the top of the retaining wall.
(d) Depth of posts. Posts must be set at a depth according to the following:
Fence Height Post Depth
8 feet or higher 3 feet
6 feet 2 feet
4 feet or lower 18 inches
(e) Permit requirement; inspection and maintenance.
(1) Permit requirement; minor repairs. It shall be unlawful for any person to
construct or rebuild a fence on any lot without having first obtained a fence
permit from the permit department. All fences require a permit; however, no
permit is required for repairs minor in nature (damaged, missing slats, blown
over, or as determined by the city). All damaged, removed, blown down, or
missing portions of such fence shall be replaced, stood up, or repaired with
comparable materials of a comparable color to the remaining portion of such
fence. Minor repairs must be performed within a reasonable amount of time
as determined by the city or the repair will be subject to obtaining a permit.
Adequate plans and specifications, as determined by the city, must accompany
each application for a permit.
(2) Inspection and maintenance. When any fence is completed, it must be
inspected. The permit department shall be notified upon completion of the
fence. The building official (or his designee) will issue a card of acceptance if
the fence complies with the provisions of this article, or it will be rejected. All
fences constructed under the provisions of this article shall be maintained so
as to comply with the requirements of this article at all times. Fences shall be
maintained by the owner or person in charge of the property in as near as
possible the condition of such fence when installed and accepted as provided
herein, and will be subject to code compliance notification and issuance of a
citation if not maintained in such condition. Fences shall be maintained as
(A) Such fence shall not be out of vertical alignment more than 20 degrees.
(B) All damaged, removed or missing portions of such fence shall be replaced
or repaired with comparable materials of a comparable color to the
remaining portion of such fence.
(C) If a new fence, section of fence or fence replacement is proposed to be
composed of wood, all wood elements (posts, fence panels, etc.) used
shall be pressure-treated with the chemicals alkaline copper quaternary
(ACQ), copper azole (CA) or micronized copper quaternary (MCQ). In
addition, non-pressure-treated cedar and redwood are acceptable.
(3) Masonry columns. All masonry columns greater than four feet in height shall
require an engineered stamped design.
(f) Appeals and special exceptions.
(1) An appeal from a decision of the building official under the terms of this article
shall be made to the planning and zoning commission.
(2) When in its judgment the public convenience and welfare will be substantially
served and the appropriate use of the neighboring property will not be
substantially injured, the zoning board of adjustment may authorize special
exceptions to the regulations provided in this article in order to permit
reasonable development and improvement of property where the literal
enforcement of the regulations would result in an unnecessary hardship.
(g) Prohibited materials.
(1) No person shall build any fence composed, in whole or in part, of:
(A) Barbed wire or razor wire;
(B) Welded or woven wire such as chicken wire, hog wire, stockade panels
and similar agricultural wires (does not include chain link);
(C) Used materials (as defined by the city);
(D) An electric fence;
(E) Galvanized sheetmetal, corrugated metal, or corrugated fiberglass; or
(F) Materials not approved for exterior exposure.
(2) The following are affirmative defenses to a violation of this section:
(A) On a lot that has an area of one and one-half acres or more, provided that
the fence is not otherwise prohibited by any other ordinance or law, a
fence may be composed of barbed wire, welded wire or woven wire, or
both, and may include an electric fence if the electric fence charging
device is approved by a nationally recognized testing laboratory.
(B) In a residential zone, an electric fence may be located only within the side
and rear yard, all electrified components must be located a minimum of
six inches inside another fence (which must be a minimum of 36 inches
in height), the electric fence charging device must be approved by a
nationally recognized testing laboratory and the fence shall otherwise
comply with all applicable laws and ordinances.
(C) This section does not prohibit the use of corrugated metal material with
a minimum 26 gauge and one-inch corrugation when commercially
designed and engineered as a fencing material as a component of a
modular, prefabricated fence.
(D) When mandated by state or federal statute.
(E) When required for public safety for local governmental facilities.
(h) Construction or protrusion on public property. No fence or any part of such fence shall be
constructed upon or caused to protrude over public property. All fences must be
maintained in a plane so as not to overhang public property.
(i) Restrictions in certain locations.
(1) Fences in easements. No fence shall be located within any easement except by
prior written approval of those agencies having interest in such easement.
Fences within utility, surface drainage (including inlets and concrete flumes)
and maintenance easements must be constructed with ornamental iron and
removable fence sections. All vertical bars must be a minimum of three inches
on center and must not exceed 3-15/16 inches on center. The maximum
diameter of all vertical and horizontal bars shall be two inches. The minimum
clearance between the bottom of the fence and grade is two inches. Fences
within drainage easements that serve underground reinforced concrete pipe
(i.e., non-surface drainage) must be constructed with metal posts and with
removable fence sections.
(2) Attachment to screening wall. Where subdivisions are platted so that the rear
or side yards of single-family residential lots are adjacent to a public street on
which a screening wall has been provided, no wall or fence shall be attached to
the screening wall.
(j) Fences in front yard. No fence shall be built within the required front yard, as defined in the
zoning ordinance, except for lots that have an area of one and one-half acres or greater.
Front yard fencing shall be limited to four feet in height and shall not be of solid construction,
providing that at least 50 percent of the fence be open.
(k) Gates.
(1) Any fence built so as to enclose an area shall provide a gate or other opening in
the fence of at least three feet in width and with a minimum headroom
clearance of six feet, eight inches in height.
(2) Gates for vehicular use must be a minimum of 24 feet from the property line for
all types of property other than residential.
(l) Wind load requirement. Fences must be able to structurally support fencing materials for a
70-mile-per-hour wind speed.
(m) Swimming pool fences. Fences around swimming pools shall be in conformance with this
section and with article 24.07.
(n) Sight visibility. See section 30.07.108(a) for sight visibility requirements for fences and
screening walls.
(o) Special-purpose fencing. Special-purpose fencing, such as fencing around tennis courts, dog
runs, etc., is permitted. Special-purpose fencing shall comply with the requirements as set
forth in this section. Smooth, non-climbable two-inch by four-inch mesh on metal posts will
be acceptable behind the building line. Any other materials require approval from the
building official.
(p) Back-to-back fencing. Back-to-back fencing is not allowed at a distance of less than five feet.
(q) Nonconforming fences. A fence that does not comply with the requirements of this article
as of May 27, 2004, shall be allowed to remain unless the fence is replaced, destroyed or
damaged to the extent of 60 percent or more of the value of the structure, in which event
the right to maintain the structure shall terminate.
(r) Height transition. Where a privacy fence and a fence or wall that screens a thoroughfare or
public street of different heights meet or connect, a stair-step transition/effect shall be
provided to match the height of the fence that is lower in height. Such transition must be
in lengths of no less than eight feet for each one foot of change of elevation and as approved
by the city.
(s) Fence post visibility. Where a privacy fence faces a public right-of-way, the fence must be
built with the posts on the inside of the property and may not be facing the public right-ofway.
(t) Approval by homeowners’ association. Approval of a fence application does not constitute
or supersede approval by the applicant’s homeowner’s association.

The provisions of this appendix shall control the design of barriers for residential swimming
pools, spas and hot tubs. These design controls are intended to provide protection against
potential drownings and near-drownings by restricting access to swimming pools, spas and
hot tubs.
AQ105.2 Outdoor swimming pool. An outdoor swimming pool, including an in-ground, aboveground or on-ground pool, hot tub or spa shall be surrounded by a barrier which shall comply
with the following:
1.The top of the barrier shall be at least 48 inches (1219mm) above grade measured on the
side of the barrier, which faces away from the swimming pool. The maximum vertical
clearance between grade and the bottom of the barriershall be 2 inches(51mm) measured
on the side of the barrier, which faces away from the swimming pool. Where the top of the
poolstructure is above grade, such as an above-ground pool, the barrier may be at ground
level,such asthe poolstructure, ormounted on top ofthe pool structure.Where the barrier
is mounted on top of the poolstructure, the maximum vertical clearance between the top
of the pool structure and the bottom of the barrier shall be 4 inches (102mm).
2. Openings in the barriershall not allow passage of a 4-inch-diameter (102mm)sphere.
3. Solid barriers which do not have openings,such as a masonry orstone wall,shall not
contain indentations or protrusions except for normal construction tolerances and
tooled masonry joints.
4. Where the barrier is composed of horizontal and vertical members and the distance
between the tops of the horizontal members is less than 45 inches (1143mm), the
horizontal members shall be located on the swimming pool side of the fence. Spacing
between vertical members shall not exceed 1.75 inches (44mm) in width. Where there are
decorative cutouts within vertical members, spacing within the cutouts shall not exceed
1.75 inches (44 mm) in width.

Exception: Boards with a minimum 30-degree angle, cut and placed at the top of the
horizontal fence members, may be used on existing fences that will become pool
barriers. This exception does not apply to fences adjacent to public right of way.
5. Where the barrier is composed of horizontal and vertical members and the distance
between the tops of the horizontal members is 45 inches (1143 mm) or more, spacing
between vertical membersshall not exceed 4 inches(102 mm).Where there are decorative
cutouts within vertical members, spacing within the cutouts shall not exceed 1.75 inches
(44 mm) in width.
6. Maximum mesh size for chain link fences shall be a 2.25-inch (57 mm) square unless the
fence is provided with slatsfastened at the top orthe bottom which reduce the openings
to not more than 1.75 inches(44 mm).
7. Where the barrier is composed of diagonal members, such as a lattice fence, the
maximum opening formed by the diagonal members shall not be more than 1.75 inches
(44 mm).
8. Access gates shall comply with the requirements of Section AQ105.2, Items 1 through 7, and
shall be equipped to accommodate a locking device. Pedestrian access gates shall open
outward away from the pool and shall be self-closing and have a self-latching device. Gates
other than pedestrian access gates shall have a self-latching device. Where the release
mechanism of the self-latching device is located less than 54 inches (1372 mm) from the
bottom of the gate, the release mechanism and openings shall comply with the following:
8.1. The releasemechanism shall be located on the poolside ofthe gate atleast 3 inches
(76 mm) below the top of the gate, and
8.2. The gate and barrier shall have not opening greater than 0.5 inch (13 mm) within 18
inches (457 mm) of the release mechanism.
9. Where a wall of a dwelling serves a part of the barrier one of the following conditions shall be
9.1. The pool shall be equipped with a powered safety cover in compliance with ASTM F1346;
9.2. Doors with direct access to the pool through that wall shall be equipped with an alarm
which produces an audible warning when the door and/or its screen, if present, are
opened. The alarm shall be listed and labeled in accordance with UL 2017. The deactivation
switch (es) shall be located at least 54 inches (1372 mm) above the threshold of the door;
9.3. Other means of protection, such as self-closing doors with self-latching devices, which are
approved by the governing body, shall be acceptable so long as the degree of protection
afforded is not less than the protection afforded by Item 9.1 or 9.2 described above.
10. Where an above-ground pool structure is used as a barrier or where the barrier is mounted
on top of the poolstructure, and the means of access is a ladder orsteps, then:
a. The ladder or steps shall be capable of being secured, locked or removed to
prevent access, or
b. The ladder or steps shall be surrounded by a barrier which meets the requirements of
Section AQ105.2, Items 1 through 9. When the ladder or steps are secured, locked or
removed, any opening created shall not allow the passage of a 4-inch diameter (102
mm) sphere.
AQ105.3 Indoorswimming pool.Wallssurrounding an indoorswimming poolshall complywith
Section AQ105.2, Item 9.
AQ105.4 Prohibited locations. Barriersshall be located so asto prohibit permanentstructures,
equipment or similar objects from being used to climb them.
AQ105.5 Barrier exceptions. Spas or hot tubs with a safety cover which complies with ASTM F
1346, as listed in Section AQ107, shall be exempt from the provisions of this appendix.

Our Fence Services

  • Fence Restoration
  • New Fence Construction
  • Fence Cleaning & Staining
  • Fence Repair Services

Fence Types

  • Board-on-Board Fence
  • Side-by-Side Fence
  • Premium Cedar Fence
  • Premium Privacy Cedar Fence

Fence Stain Colors

  • Sable
  • Walnut
  • Cordovan Brown
  • Padre Brown
  • Wood Chip
  • Russet
  • Pewter